1980-1986 T4 4 SPEED TRANSMISSION

Category: Tags: , ,

Borg-Warner T4  Transmission

t4_t5_transmissionThe Borg Warner T4 & T5 transmissions were standard shift, four-speed & five-speed transmissions (respectively) found in 1982 to 1986 Jeep CJ models. They are light-duty transmissions found behind the AMC 150 (2.5L) I4 and the AMC 258 I6 (4.2L).

These transmissions are popularly replaced with the SM420 and SM465 transmissions, since they share a similar bellhousing bolt pattern and compact installations.

Identification

The T4 / T5 transmission case is 9-1/4″ long in addition to its 6″ shifter / tailhousing assembly; for a 15-1/4″ total length. It features a cast aluminum top cover that is retained by eleven bolts and a main case of cast aluminum.

t4_t5_specs

The Jeep T4 / T5 has a 23 spline output shaft for connecting to the transfer case input shaft. The transmission has a 7-1/2″ input shaft (stick-out length) with a 1-1/8″ x 10 splines for AMC I6 engines and a 1″ x 14 spline for the AMC 2.5 I4 engine.

Typical Borg Warner casting numbers found on the T4are 13-51 and 13-52 for the T5. The shifter is curved, instead of an angular bend like the T176. The transmission is the progeny of the SR4, so they look similar and are occasionally confused.

Later T4’s and T5’s have a larger front countershaft bearing. The earlier version is denoted by a “-102” suffix and the later version is denoted by a “-202” suffix.

A strengthened version of the T5 called the “World Class” was available and parts were formerly available to address some of the transmission’s weaknesses. However, even with these, splines shear and the cases stretch under torque and no such upgrades could prevent some failures.

Transfer Case Compatibility

The Jeep T4 & T5 was factory-married to the Jeep Dana Spicer Model 300 transfer case.

 

Call Now Button(609) 654-5070